A dedicated stats screen is one of the most satisfying upgrades you can make to a build, and it takes about fifteen minutes. This walkthrough covers picking a screen, then getting a CLU VIEW dashboard running fullscreen on it.
> What a sensor panel is_
A sensor panel is a screen that shows live readings from your PC: CPU temperature, GPU load, RAM use, fan speeds, FPS. You glance at it instead of alt-tabbing mid-game or running an overlay on top of what you're doing. People also call them stat screens, stats displays or system monitor dashboards. Plenty of builders mount a small one inside the case and treat it as part of the look.
> Step 1: Pick your screen_
- ■Small HDMI monitors (5–10″) give higher resolution and better refresh rates. You'll route an HDMI cable from your GPU plus USB for power.
- ■In-case USB displays are powered over USB at typical resolutions of 480×320 to 1024×600, and mount easily with velcro or a 3D-printed bracket.
- ■Any spare monitor works. An old screen on the desk makes a great full-size panel; just connect it as a second display.
Before you buy, check both connections (some HDMI panels draw power over USB) and measure the mounting space. Turing and XuanFang smart screens are a different case: they take images over USB and don't show up as a normal monitor, and CLU VIEW's output to them is still experimental. The USB screen guide covers which ones work. The Lian Li 8.8″ has its own setup guide. Whatever you pick, the panel's pixel resolution matters more than its size: a 480×320 screen fits far fewer readable labels than 1920×1080.
> Step 2: Configure it in Windows_
Plug in the display, then open Settings > System > Display. If the screen doesn't appear, click Detect.
Set it to "Extend these displays", not duplicate, and select the screen's native resolution.
Drag the monitor icons so the layout matches where the screen physically sits.
> Step 3: Install CLU VIEW_
Download it free and run the installer. It's code-signed by MR.CLU Software. The certificate is new, so SmartScreen can still warn for a while; if it does, check the publisher reads MR.CLU Software, then click "More info" and "Run anyway".
> Step 4: Build your dashboard_
Set the canvas size to your screen's resolution first. Then browse the widget gallery and add what you want to watch: CPU temperature, GPU usage, RAM, FPS, fan speeds. Drag to position, pull corners to resize, and use the properties panel for colours, styles and effects. If you'd rather skip the blank canvas, import a template and adapt it.
> Step 5: Panel Mode_
Click Panel Mode, pick your secondary display from the dropdown, and the dashboard goes fullscreen and borderless on that screen while CLU VIEW keeps feeding it live data from the system tray. Enable autostart in settings so the panel comes back on every boot.
> If something's off_
- ■Screen not detected: try a different USB port (some displays need USB 3.0) and check whether the display needs a driver.
- ■Dashboard looks stretched: match the CLU VIEW canvas size to the screen's native resolution, set in Windows first.
- ■Sensors showing zero: temperatures and voltages need admin privileges; enable the hardware driver in settings.
On small screens, bigger fonts and fewer widgets read better. Less is more at 3.5 inches.